Call us today
TEXA Air-conditioning Solutions
We supply the full range of TEXA air-conditioning equipment, ideal for Car, Truck and Off-highway applications.
Today’s technicians are faced with a vast selection of A/C recharge service stations. In this highly competitive market, TEXA service stations have always stood out for advanced technical features, many patented, that guarantee the highest level of precision.
KONFORT A/C recharge stations for R1234yf, R134a and R744 (CO2)
The KONFORT 700 range includes 11 models with different specifications and operating modes, for servicing vehicle air conditioning systems containing R1234yf, R134a or R744 (CO2). The range is produced on an assembly line that is the only one of its kind in the world, to ensure the ultimate in quality and lasting reliability. The KONFORT range features a total of 10 registered international patents. The components used all have exceptional characteristics and guarantee refrigerant recovery efficiency in excess of 95%. The neat design combines easy handling, sturdiness and safety to make all maintenance operations simple and easy.
Dual Gas Solutions
TEXA is one of very few companies in the world that offers an air conditioning service station able to work with the older R134a refrigerant and the new R1234yf refrigerant (obligatory for newly homologated vehicles in Europe) at the same time.
This station is the KONFORT 780R BI-GAS: it is equipped with two separate tanks and circuits, so that, within a matter of minutes, you can switch between servicing vehicles with A/C systems filled with different refrigerants.
For R134A or R1234YF Refrigerant
TEXA’s 760R, 760R BUS (for large A/C systems like those on buses and specialist vehicles), 760 TOUCH, 760 BUS TOUCH, 720R service stations can be configured to work either with the older R134a or with the new R1234yf.
You need to specify which refrigerant you plan to work with when you purchase the station, but retrofit kits are available to switch refrigerant at a later date.
For R1234YF Refrigerant
The KONFORT 707R and KONFORT 770S are two A/C charging stations specifically designed for the new refrigerant gas R1234yf, mandatory for all the newly homologated European vehicles. They were built in compliance with the strict specifications required by German manufacturers. The model 770S is equipped with the refrigerant identifier kit as a standard.
For R134A Refrigerant
TEXA still offers three recharge stations, the KONFORT 705R, KONFORT 705R OFF ROAD and the 710R, exclusively for use with the older R134a refrigerant, which is still found in most vehicles on the road today.
These stations offer the same excellent design and build as the top models in the KONFORT range, but are simpler in a number of details.
For R744 (CO2) Refrigerant
The KONFORT 744 recharge station was developed in collaboration with leading German carmakers and is one of the very few solutions currently available that has been specifically designed to service and recharge the latest air conditioning systems for R744 refrigerant (C02).
Exclusive TEXA Solutions
Today’s technicians are faced with a vast selection of A/C recharge service stations. In this highly competitive market, TEXA service stations have always stood out for advanced features, many patented, that guarantee the highest level of precision.
TEXA is the only European company that has designed and manufactured a refrigerant identification system for use with its air conditioning recharge stations. This system was developed using only the most compact, accurate and reliable technology.
This TEXA system not only correctly identifies these two refrigerants but checks their purity too. The entire operation takes approximately one minute. If the refrigerant is found to be unsuitable or contaminated, the station warns the operator and prevents recharging.
Standard oil bottles are not hermetically sealed, they always contain a percentage of air. The water molecules in the air bind with the oil and contaminate it.
TEXA developed special containers to prevent the oil from becoming contaminated by air and humidity, which have been patented.
These special bottles can be re-used thanks to a special system that removes the air from the bottle.
TEXA’s Forming Gas Kit for leak detection allows quick solving for any problem in A/C systems that use refrigerants R134a, R1234yf or R744 (CO2).
Using Forming Gas is a smart and real solution, since its chemical composition (95% nitrogen and 5% hydrogen) allows detecting even the smallest leaks with extreme precision, thanks to its molecular size, much smaller than any refrigerant gas.
With the introduction of new vehicles, new oils have been introduced.
The use of incorrect oils could lead to system damage and safety problems, so the operator must take care to avoid mistakes.
TEXA has developed an automatic oil bottle recognition system which, by comparing the data contained in the vehicles database, signals if the incorrect bottle is in use.
The new R1234yf refrigerant has been classified as being ‘highly flammable’ and this must be acknowledged by the operator.
The KONFORT 700 series adopts a high efficiency redundant fan system to eliminate any possible refrigerant build up within the unit.
The 780R and 760R charging stations for R1234yf automatically carry out a double-check for possible gas leaks from the tanks. All safety related operations take place automatically in order to eliminate errors.
The service station automatically checks for leaks in the vehicle’s air conditioning circuit before it starts the recharge cycle.
The KONFORT A/C recharge service stations are equipped with clear, easy to read pressure gauges for monitoring pressures, even when the power is switched off.
SD cards can be used to record all the service operations performed by the service station.
Workshops can consult archives of KONFORT station services either in chronological order or by searching for a vehicle registration number or a customer name.
Flushing is the mechanical operation carried out to clean the air conditioning system components of a vehicle. This includes:
- A supplementary 6 Litre capacity tank
- A stainless steel filter which is easily removable for cleaning
- 5mm diameter flushing hose
- Universal adapter case (more than 60 pieces)
In order to guarantee safety and efficiency, it is important that each type of oil and refrigerant are not cross-contaminated.
TEXA have developed a special automatic flushing function to clean the internal circuits of the service station.
The service station incorporates a thermal printer that can be used to print out detailed reports on all the operations performed, at any time.
For more information, don’t hesitate to get in contact with us or view the brochure